Tampilkan postingan dengan label furniture design. Tampilkan semua postingan
Tampilkan postingan dengan label furniture design. Tampilkan semua postingan

Kamis, 03 Maret 2016

Furniture Design History

Furniture design has been a part of the human experience since the beginning of history. Evidence of furniture survives from as far back as the Neolithic Period in the form of paintings, wall Murals discovered at Pompeii, in sculpture and examples have also been excavated in Egyptian Pyramids and found in tombs in Ghiordes (modern day Turkey). These notes will track the main advancements, developments, styles and materials in furniture design highlighting the identifying features of each period, the materials used and show images of some of the most significant pieces of furniture ever designed. The furniture design timeline below outlines just some of the different periods of furniture design and gives you a basic overview of the timeline of furniture design history. Choose from the menu below to look at one furniture design period in more depth.
The history of furniture design timeline
Furniture Design History Timeline


Neolithic Period Furniture:


Neolithic Period Furniture
Neolithic Period Furniture
A excavated site dating from 3100-2500 BC in Skara Brae, Orkney uncovered a range of stone furniture. Due to a shortage of wood in Orkney, the people of Skara Brae were forced to build with stone, a readily available material that could be turned into items for use within the household. Each house was equipped with an extensive assortment of stone furniture, ranging from cupboards, dressers and beds to shelves and stone seats. The stone dresser was regarded as the most important as it symbolically faced the entrance in each house and is therefore the first item that was seen when entering a house.


Ancient Egyptian Furniture:


Ancient Egyptian Furniture
Ancient Egyptian Furniture
The hyperarid climatic conditions of Egypt since the third millennium BC are perfect for the preservation of organic material. Thanks to these conditions Ancient Egyptian furniture has been excavated and various sites and includes 3rd millennium BC beds, discovered at Tarkhan, a 2550 BC gilded bed and chairs from the tomb of Queen Hetepheres, and boxes, beds and chairs from Thebes. There were two severe sides to the furniture excavated, the intricate gold gilded ornate furniture found in the tombs of the Pharaohs and the simple chairs, tables and baskets of the ordinary Egyptians.


Ancient Greek Furniture:


Ancient Greek Furniture
Ancient Greek Furniture
Ancient Greek furniture design can be dated back to the 2nd millennium BC, including the famous klismos chair. The furniture designs are preserved not only by the examples still in existance, but by images of them depicted in Greek vases. In 1738 and 1748 excavations of Herculaneum and Pompeii revealed perfectly preserved Roman furniture. The ashes from the eruption at Mount Vesuvius preserved the furniture from 79 A.D. right up its excavation in the eighteenth century. Characteristic of this early furniture were highly influenced by the furniture of the ancient Egyptians with a stiff, rectangular, and unflattering shape. In the 4th and 5th centuries, once the Greeks developed their own style, furniture became less square and rigid and more curved and flowing.


Medieval Furniture:


Medieval Furniture
Medieval Furniture
The medieval period was a stark and somewhat crude time, and that is reflected in the furniture styles of the era. The furniture of the medieval period is very distinctive in style. Its most notable characteristics are ornate wood carvings on the border of chairs and canopy beds, garish structural layouts and colours that are basically grey, beige or black. Forms were mainly square or rectangular with very little in the way of curved lines or circular forms.


Renaissance Furniture:


Renaissance Furniture
Renaissance Furniture
Along with the other arts, the Italian Renaissance of the fourteenth and fifteenth century marked a rebirth in furniture design, often inspired by the Greco-Roman tradition. Starting in the fifteenth century, a similar renaissance of culture, occurred in Northern Europe, particularly in the Netherlands, Belgium and Northern France. These designs were distinctly different from that of Medieval times and were characterized by opulent, often gilded designs that frequently incorporated a profusion of floral, vegetal and scrolling ornamentation. The aim of these pieces were often to showcase the skills of the craftsmen who made them.


Jacobean Furniture:



Jacobean Furniture
Jacobean Furniture
After the Renaissance there was a gradual change to a less ornamented, quieter style of furniture. In Britain table legs, for example became straighter and narrower than were typical of earlier pieces and instead spiral turned legs became typical of this period. In general furniture profiles became lower and more rectangular. Later Jacobean furniture, during the era of Oliver Cromwell the Protector, was very stern, square, and frugal, a suitable style for a time of relative poverty. But with the return of the monarchy under Charles II, Carolean furniture once again became more ornate, characterized by intricate carved stretchers and colourful upholstery with tasselled trim.
By the end of the period, the influence of the British William and Mary style was beginning to show. Compared to the Jacobean and Carolean pieces this style of furniture was lighter and more elegant. Inverted, cup-turned legs, bun feet, and serpentine stretchers made this a very identifiable style.


Colonial furniture:


Colonial Furniture
Colonial Furniture
Across the water in the United States, during the early Colonial period, most furniture arrived along with the first immigrants. They brought furniture pieces typical of the Jacobean and Carolean periods in Britain with them, and then later made their own furniture in a similar style. These pieces were generally sturdy and heavily carved, many with turned legs and bun feet. In the harsher environment of some of the Colonies these pieces were simpler representatives of their parent styles, befitting the more straightforward and utilitarian life of the settlers.
Other settlers also brought their influences with them to the colonies, most notably the Dutch and French in the North east, and the Spanish in the South west. Although recognisably different from the British inspired designs, the Dutch pieces are essentially in the same tradition. However the different climate and different wood available to Spanish colonists led to a distinctly different style known as Mission or South western.
The earliest American-made piece of furniture is a chest made by Nicholas Disbrowe around 1660. Uncompromisingly rectangular, its distinctively carved frame-and-panel construction, although very reminiscent of earlier British Age of Oak pieces, is already recognizable as a distinct American style. Many other early Colonial era pieces, such as wainscot chairs and heavy joint-tables, are similarly in the Age of Oak tradition.


Rococo Furniture:


Rococo Furniture
Rococo Furniture
In the eighteenth century, furniture design began to develop rapidly, although there were some styles that belonged primarily to one nation, such as Palladianism in Great Britain or Louis Quinze in French furniture, others, such as the Rococo and Neoclassicism were commonplace throughout Western Europe. In reality the term '18th-century furniture' therefore refers to a wide variety of styles including William and Mary, Queen Anne, Georgian, Chippendale, Hepplewhite, Sheraton, Adam, Regency, Federal, and the French periods of the several Louis, Directoire, and Empire.
While seperate, all 18th-century furniture, whether American, British, or French shared a similar style of construction that is distinct from the subsequent mass-produced furniture of the 19th century. Eighteenth-century furniture is commonly thought of as representing the golden age of the highly trained master cabinetmaker, trained in the craft of furniture design which manifests in highly finished, sophisticated designs.


Revival Furniture:


Revival Furniture
Revival Furniture
The 19th century was marked by the Industrial Revolution, which caused profound changes in society. With increasing working populations in cities, the rise of a new class of wealthy of furniture buyers, together with the arrival of mass-production and the demise of the individual craftsman-designer, the gradual progression of furniture styles that had developed through the previous centuries was replaced by a raft of imitation or revival styles. These concurrent revival styles, including Gothic revival, Neoclassicism and Rococo revival became easy and inexpensive to manufacture as technology developed during the industrial revolution.
With mass-production technology in place it was a simple matter to graft historically correct ornaments onto all sorts of furniture, thereby making possible for the creation of a continual stream of revival styles to meet the demands of the public. The result was a century of furniture whose common denominator was excessive ornamentation in the form of applied metal or wood carvings, inlays or stencils.


Art Nouveau Furniture:


Art Noveau Furniture
Art Noveau Furniture
The name "Art Nouveau" is French for 'new art', and it emerged in the late 19th century in Paris. The style was said to be influenced strongly by the lithographs of Czech artist Alphonse Mucha, whose flat imagery with strong curved lines was seen as a move away from the academic art of the time. Art Nouveau furniture used lines and curves as graphical ornamentation and hard woods and iron were commonly used to provide strong yet slim supporting structures to a furniture pieces.


Bauhaus Furniture:


Bauhaus Furniture
Bauhaus Furniture
Because of the greater availability of a wider array of materials than ever before, and because of an ever-expanding awareness of historical and cross-cultural aesthetics, 20th-century furniture is perhaps more diverse, in terms of style, than all the centuries that preceded it. The first three-quarters of the twentieth century saw styles such as Art Deco, De Stijl, Bauhaus, Wiener Werkstatte, and Vienna all work to some degree within the Modernist idiom. The Bauhaus school was founded by Walter Gropius in Weimar in 1919. In spite of its name, and the fact that its founder was an architect, the Bauhaus was founded with the idea of creating a 'total' work of art in which all arts, including furniture would eventually be brought together. The furniture designs that emerged from the Bauhaus became some of the most influential designs in modern design.


Art Deco Furniture:


Art Deco Furniture
Art Deco Furniture
The Art Deco movement began in Paris in the 1920s and it represented elegance, glamour, functionality and modernity. Art deco's linear symmetry was a distinct departure from the flowing asymmetrical organic curves of its predecessor style art nouveau. Art deco experienced a decline in popularity during the late 1930s and early 1940s when it began to be derided as presenting a false image of luxury, eventually the style was ended by the austerities of World War II.


Modern Furniture:


Modern Furniture
Modern Furniture
Born from the Bauhaus and Art Deco streamline styles came the post WWII Modern style using materials developed during the war including laminated plywood, plastics and fibreglass. In modern furniture the dark gilded, carved wood and richly patterned fabrics gave way to the glittering simplicity and geometry of polished metal. The forms of modern furniture sought newness, originality, technical innovation, and ultimately conveyed the present and the future, rather than what had gone before it as revival styles had done. This interest in new and innovative materials and methods produced a certain blending of the disciplines of technology and art. The use of new materials, such as steel in its many forms; moulded plywood and plastics, were formative in the creation of these new designs. They were considered pioneering, even shocking at the time especially in contrast to what came before.

Back to Top


Baca selengkapnya

Sabtu, 20 Februari 2016

Furniture Materials

Furniture Design Materials
The versatile material of wood used to full effect in this furniture design

Wood is the most versatile, renewable and sustainable resource on the planet which is why wood is also the most commonly used material in the creation of furniture. As wood is an organic material and can be native to specific regions you may find that different woods are traditionally more commonly used for furniture in different countries. Nowadays, with the cost of travel and transport at an all time low these different woods are imported and exported at a much higher rate and the options for furniture makers are at an all time high. New, man made 'woods' have also added to the variety of options available and it is up to the furniture maker to decide which wood is best for any given project. Other materials are of course used for either structural or aesthetic properties and they are also discussed here. Browse the list below to learn about the qualities and common uses of each type of furniture material.


Cedar:
Cedar is a reddish soft wood native to Lebanon, western Syria and south central Turkey where it is traditionally used in the making of Venetian Blinds. It has a distinctive sweet odour which is why it is extensively used in chest making, closet lining and household novelties. It is very easy to work with, uniform in texture and is also resistant to decay leading to its use as an outdoor house shingle.

Cherry:
Cherry is close grained hard wood that resists warping and shrinking well. The native range of the wild cherry extends through most of Europe, western Asia and parts of northern Africa. Cherry wood reddens when it is exposed to sunlight. It ages well and is extensively used in cabinet making, boat trim, novelties and solid furniture handles.

Chestnut:
Chestnut is a hard wood native to temperate regions of the Northern Hemisphere. There are numerous variations, the most popular of which is Spanish Chestnut. Chestnut wood loses it's durability when grown beyond 50 years so it is difficult to get large, long timber from it. It has always been highly valued for small outdoor furniture pieces, where durability is important, as well as fencing and wooden shingles for covering buildings, it is also used to make barrels.

Chipboard:
Chipboard is an artificial wood made like MDF but from actual wood chips, hence the name. It is widely used for the structural casing of kitchen furniture and cabinets which are then covered with a laminate or wood veneer. It is also widely used for low cost sub flooring. It is only useful in sheet form and cannot be easily used or worked in any other format.

Elm:
Elm is valued for its interlocking grain which gives it a high resistance to splitting, with significant uses in chair seats and coffins. Elm wood is also it quite pliant and is available in long planks due to the long, straight, trunks of the tree, For these reasons elm is favoured as a source of timber for keels in ship construction. Elm was historically used by bowyers during the Middle Ages to make longbows.

Fir:
Fir is a fast growing soft wood which is uniformly textured and has a very low resistance to rotting and decay. It is easy to work and finishes well. Fir is used for making furniture, doors, picture frames, window frames, general millwork and as an interior trim. It is also a main component of plywood.

Glass:
Glass in its ordinary form will break under pressure into sharp shards, and is therefore not suitable for use in furniture. Toughened glass is formed from a prepared sheet of ordinary glass which has been heated and then rapidly cooled with cold air, this heating and rapid cooling process results in the outer surfaces contracting and solidifying before the interior, thereby inducing permanent compressive stresses into the surfaces of the glass. This type of glass is suitable for use in furniture manufacture and can even be bent and curved.

Hemlock:
Hemlock is a lightweight softwood that is native to the North American continent but is also grown in Europe. It machine cuts well due to the wide grain and rarity of knots. It is uniformly textured and has a low resistance to decay. It is mainly used as a construction timber for planks, door panels, sub flooring and transportation crates.

Lime:
Lime is a hard wood native to Britain that is a pale yellow colour, which gradually darkens over time. Lime has excellent carving properties and it is especially favoured for delicate work by master woodcarvers. Seasoned lime is very stable and is soft enough to be carved and yet firm enough to hold a precisely cut surface well. Lime also stains well, has good bending properties and is often used for making furniture.

Mahogany:
Mahogany is finely grained hard wood which is reddish brown color. It is extremely durable and resists swelling, shrinking, warping and twisting. Mahogany is used extensively for high quality, expensive furniture such as wooden cabinets and veneered tables and dressers. It is also used in the construction of boats due to its high resistance to swelling and warping caused by water.

Maple:
Maple is a fine textured hard wood native to Asia with immense strength and hardness. With moderate shrinkage, maple machines well and is best used in flooring, fine furniture and hard wearing surfaces such as bowling alley lanes. Maple is a very light coloured wood and it is sometimes even bleached before finishing to make it even whiter.

Medium Density Fibre Board (MDF):
MDF is an artificial wood made from powdered wood bonded with glue and compressed to form sheets usually 2400mm x 1200mm in size. It is quite soft, fairly pliable and very easy to work with. It cuts, sands and finishes very easily. It is used widely for interior projects especially for cupboards and shelving. Due to its nature it is highly recommended to wear a face mask when sanding MDF as the particles are tiny and easily inhaled.

Oak:
Oak is a hard wood, light in colour, which has good pliable qualities despite its durable nature. It stains and finishes well and resists moisture absorption. Oak is great for furniture, for which it is commonly used, due to its natural aesthetic qualities as well as its strenght. It is also used for boat framing, wooden desks and flooring.

Pine:
Pine is a fast growing soft wood native to Scandinavia. It has a uniform texture and is very easy to work with. It finishes well and resists shrinkage, swelling and warping despite having a wide grain. It is widely used in the construction of timber frame houses, panelling, mass produced furniture, wood pallets and numerous other items. It is one of the most widely used timbers in the world and is so fast growing that it is 'farmed' in countries all over the world.

Plywood:
Plywood is an artificial wood that was invented during the Second World War and was primarily used to build boats and landing craft for the military. It is made from numerous thin laminates of wood glued together. Each layer is at right angle to the grain of the other to give it great strength while also allowing it to remain quite pliable. The thinner the sheet, the more pliable it will be. It is used widely in the building industry as a sub flooring material or as a structural casing between walls.

Plastic:
Plastic is an artificial material that was created in 1862 in London. The material was originally called Parkesine was an organic material derived from cellulose that once heated could be moulded, and retained its shape when cooled. It has since been developed greatly with numerous variations but its original properties remain its most valuable. The ability to mould plastic into any form has made it a very popular material for mass produced furniture but also for modern bespoke furniture where any shape or form is possible.

Redwood:
Redwood is native to a narrow strip of land along the lower west coast of America. It is light but relatively durable softwood that is easy to work with. It has a good natural resistance to rotting and decay and is therefore commonly used for making outdoor furniture, fencing and house panelling. It is named for it's colour, a deep pinky, red hue through the wide grain.

Rosewood:
Rosewood is tight grained hard wood with dark reddish brown color. It is hard to work with and requires a lot of polishing to achieve a good finish. It is commonly used for making musical instruments such as pianos, as well as tool handles, sculptures, veneers and furniture. It has also has a uniquely pleasant fragrance which sets it apart from most other woods.

Spruce:
Spruce is a relatively strong soft wood native to Scandanavia that finishes well but has a low resistance to rotting and decay. It possesses moderate shrinkage and is light in colour and weight. It is a good option for making masts and spars for ships, aircraft, crates, boxes, general millwork and ladders due to its favourable strength to weight ratio.

Steel:
Steel, especially tubular steel, became popular as a furniture making material after the popularity of the Wassily Chair, also known as the Model B3 chair, which was designed by Marcel Breuer in 1925-1926 while he was the head of the cabinet-making workshop at the Bauhaus, in Dessau, Germany. This modern designed showcased the potential use of tubular steel as a structural as well as an aesthetic material which gave added options to furniture designers in terms of what unusual support sytems were now possible.

Teak:
Teak is a renowned hard wood that is very moisture resistant. It resists warping, cracking and decay and is used in a wide variety of ways that make use of its extreme strenght and hard wearing qualities, these include furniture, panelling, window frames, ship building, church doors and flooring. It is also sometimes used as a construction timber for its load bearing capabilities, for example, as a cross beam.

Walnut:
Walnut is a hard word that is fine in texture, dark in colour and strong yet easy to work. It resists shrinking and warping and can take numerous types of finishes as it takes stains and glazes very well. It is used mainly for making solid and veneered furniture, cabinets, wall panelling and decorative novelty trinkets. The English Walnut actually originated in Persia, and the Black walnut is native to the United States.




Baca selengkapnya

Furniture Design Careers

Furniture Design Careers
Furniture Design Careers

Furniture Maker

Furniture is an essential part of our daily lives. It is what we sit on, eat and work from, where we store our clothes and possessions and where we sleep. Furniture makers design and craft individual pieces of furniture and storage cabinets such as chairs, tables, dressers, wardrobes, beds and more. They may also restore antique or damaged items of furniture. Antique pieces of furniture can be valued at tens of thousands of pounds so highly skilled restoration work, on behalf of the furniture maker, required to preserve them. Due to the unique nature of bespoke furniture, furniture makers often work alone or in a small furniture design studio workshop with a limited number of other furniture makers or designers.

Skills: 

Furniture making was originally a hands-on trade only, involving long hours creating individual pieces to demand. These days, however, the vast majority of furniture making is done in large factories with the use of industrial machines. In these cases the role of the furniture designer becomes more important than that of the furniture maker. The emergence of flatpack furniture has meant that lower manufacturing and storage costs can be passed on to the customer. Nevertheless, there will always be demand for beautiful and unique, bespoke pieces of furniture, and thus the most skilled aspects of furniture making, although in decline, will never become extinct.
These skills include creativity, attention to detail, good spatial awareness and an ability to visualise in three dimensions. The more practical requirements are being naturally good with your hands, a patience to work with great care and an ability to use a wide variety of woodworking tools. Alongside these skills an awareness of health and safety practices is recommended as furniture makers work in workshops and studios with lots of high powered industrial machinery and hand held electrical tools.

Qualifications/Experience: 

Furniture makers need no standard qualifications or specific training however, they should have a background and/or qualification in Art and Design, Wood Working or Model making. They may also have a more specialised background or training, for example, in industrial Design, Furniture Making or Fine Art. Alternatively, furniture makers may have started an apprenticeship and learned their skills on the job under the guidance of an existing furniture maker.

Furniture Designer  At Work

Prop Maker

Prop Makers work in the Properties Departments of feature films, television series and theatre productions making any props that are not being bought in, or hired. Prop Makers use a wide variety of materials, techniques and tools, to design and create the required props. These represent a huge range of objects, including 'stunt' props which are replicas of other props, made of soft or non-hazardous materials, and specialised objects that move or light up. They may also have to adapt or modify existing props. Prop Makers may work alone, or as part of a larger Props team in a Production workshop.
Prop Makers are generally given instructions, designs or rough ideas by the Artistic Director prior to filming. From these designs Prop Makers plan and create the necessary props. They may carry out their own research into the style and specifications of the props required. On period films, for example, this may also involve investigating how the objects would have been created during a particular historical period. Prop Makers often have to work within strict timescales and to tight deadlines. Normally Prop makers produce a minimum of two of every item, in case of damage. During the shoot Prop Makers may be responsible for operating any special props, or for instructing Actors in their interaction with Props.

Skills: 

Prop Makers should have a wide knowledge of the basics of Prop Making: technical drawing, a good knowledge of computer design packages, the ability to work safely with typical industry materials (e.g., fibreglass, latex, foam, polystyrene, wood, cotton and steel), and the ability to work with a variety of different machinery and tools. Prop Makers may also have specialist skills, such as: sign writing, upholstery work, mould work, woodturning, sculpture, casting, furniture making, modelling, electrical engineering and electronics.
Prop Makers need to be adaptable and able to work with imagination and ingenuity. They need good problem solving skills and must be open to learning new skills and techniques to keep up to pace with developments in the industry. The ability to work to external deadlines, under their own initiative, is essential, as is an eye for detail and accuracy. Working as part of the larger Properties Department, and at times as part of a Prop-making team, Prop Makers must have good communication skills and enjoy interacting with others. As they work with hazardous equipment and materials, an in-depth understanding of relevant Health and Safety legislation and procedures is vital to the role.

Qualifications/Experience: 

Prop Makers need no standard qualifications or specific training however, they should have a background and/or qualification in Art and Design, Wood Working or Model making, and experience in the basics of Prop Making. Many Prop Makers train in Stage and Set Design or Stage Management. They may also have a more specialised background or training, for example, in Graphic Design, Furniture Making or Fine Art. Alternatively, Prop Makers may have started in junior roles in the Art department and learnt their skills on the job under the guidance of an existing Prop Maker.


Cabinet Maker

Cabinetmakers, as the name suggests, make cabinets and other (predominately kitchen) furniture. Cabinetmakers often make their products according to set specifications, sometimes for mass production. In addition to designing and building cabinets, they may also have the task of installing them. They need to be familiar with various tools and machines, skilled with their hands and adept at sanding, staining and sealing wood into polished products. Part of cabinetmaking includes creative design and woodworking. They may find employment in furniture stores, furniture repair shops and construction companies.

Qualifications/ Experience: 

A lot of woodworkers receive their training on the job, however, they can also obtain skills through formal training at colleges, vocational schools, universities or through an apprenticeship. Some programs result in a certificate or an associate's degree, and others may offer craft qualifications. Training can include instruction in computer aided design (CAD) and computerized cabinetmaking programs for creating 3D drawings, plans and elevations. Students learn about the characteristics of differnt wood, joinery techniques, design and product assembly and installation.



Baca selengkapnya